Plumbing

3" Galvanized Hose Clamp

H03-0058VP

Larger picture

Carded 2 Per Card.

2.61 Retail

Hand Pump Kit

36003

Larger picture

With fittings. Pump antifreeze directly into your RV water lines & supply tanks through the faucets or city water inlet. Carded.

18.79 Retail

3" Galvanized Hose Clamps

H03-0058

Larger picture

Minimum 10 pieces.

1.21 Retail

RV Blow Out Plug

36104

Larger picture

Blow out plugs make it possible to completely clear water lines. Simply screw plug into the city water inlet, open all drains and faucets. attach and activate air pump until all lines are clear of water.

2.75 Retail

18" Universal Thermocouple Kit

RC09273

Larger picture

Thermocouple adapter to fit all RV gas water heaters and furnances.

7.70 Retail

Teflon Tape

A05-0260

½" X 260" . .35 density. Bulk

0.59 Retail

RV Water Heater Drain Valve - 3/8"

RC11683

Larger picture

Skinpack.

4.51 Retail

Stainless Hose Clamps

H03-0002

1/2" x 1-1/8" clamp
Minimum 10 Pieces

1.05 Retail

Stainless Hose Clamps

H03-0007

7/8" x 2-3/4" clamp.
Minimum 10 pieces.

1.06 Retail

Stainless Hose Camps

H03-0009

3" clamps.
Minimum 10 pieces.

1.77 Retail

RV Water Heater Drain Valve - 1/2"

RC11703

Skinpack.

4.83 Retail

1/2" Elbow Fitting

PLU248

Shark Bite Push-Fit Connection. Easier way to join copper, CPVC or PEX. Certified to ANSI/NSF61. No soldering, reusable. Approved for underground or behind walls. Up to 200 PSI and 200 degree F certification.

1/2" End Cap

PLU514

Shark Bite Push-Fit Connection. Easier Way to join copper, CPVC or PEX. Certified to ANSI/NSF61. No soldering, reusable. Approved for underground or behind walls. Up to 200 PSI and 200 degree F certification.

Male Adapter

PLU120

1/2" pipe to 1/2" NPT. Shark Bit Push-Fit Connection. Easier way to join copper, CPVC or PEX. Certified to ANSI/NSF61. No soldering, reusable. Approved for underground or behind walls. Up to 200 PSI and 200 degree F certification.

1/2" Tee

PLU362

1/2" Sharkbite Disconnect Clip

PLU710

1/2" Coupling

PLU008

Shark Bite Push-Fit Connection. Easier way to join copper, CPVC or PEX. Certified to ANSI/NSF61. No soldering, reusable. Approved for underground or behind walls. Up to 200 PSI and 200 degree F certification.